Aluminium Ingots
We manufacture and supply a wide range of Aluminium alloy ingots that are in complete compatibility with Euro six norms. AAI Aluminium alloys find wide applications in various Aluminium pressure die casting units, automotive parts manufacturing units, building and construction material etc.
Over the period we have carved a niche as one of the leading Aluminium alloy ingots and Aluminium ingots manufacturers and exporters from India. Fabricated from the finest quality alloy our ingots are valued for increasing fuel efficiencies of automobiles and reducing their power consumption. Being in sync with environment and sustainable development, our range of products is recyclable.
ALUMINUM ALLOYS AS PER INTERNATIONAL STANDARDS
- L.M. 0 Sand Castings for Electrical, Chemical, Food Applications
- L.M. 2 Widely used Alloy for all Types of Die Castings
- L.M. 4 The most versatile Alloy with very good castings characteristics. UTS can be greately increased after heat treatment
- L.M. 5 Castings required maximum resistance to corrosion such as marine components can be casted in such and chill
- L.M. 6 Very suitable for large intricate thin walled castings in all type of moulds
- L.M. 9 Common to L.M.6 characteristics but higher U.T.S. after heat treatment
- L.M. 10 Suitable for sand and chill castings with high strenth and shock resistance require special foundry technique; heat treated
- L.M. 11 Suitable for die and centrifugal castings
- L.M. 12 Mainly used where a very good machined surface finished and hardness is required
- L.M. 13 Used in piston castings
- L.M. 16 Castings requiring high mechanical properties can be casted in sand or chill process
- L.M. 18 High resistance to corrosion with good foundry characteristics
- L.M. 22 Used for chill castings requiring good foundry characteristics and ductility. Requires heat treatment
- L.M. 24 One of the two most widely used alloys for all types of castings
- L.M. 25 Suitable where good resistance to corrosion combined with high strength is required
- L.M. 28 Piston alloy with lower coefficient of expansion than LM 13
- L.M. 29 As LM 28 but lower coefficient of expansion
- L.M. 30 For unlined die cast cylinder block with low expansion and excellent wear resistance.
ALUMINUM ALLOYS AS PER CUSTOMER SPECIFICATION AND CUSTOMIZED MICROSTRUCTURE DESIGN
- AARYAN ALLOYS INTERNATIONAL (AAI) developed Alloys
- Gravity / Sand Casting Primary Alloys
- High Purity LPDC Alloys
- Pressure Die Casting Alloys
- Investment Casting Alloys
- Aluminum Master Alloys
- Masters of Ti / B / Ti-B / Fe / Cu / Cr / Ni / Mn / etc
ALUMINUM ALLOYS AS PER INTERNATIONAL STANDARDS
| BS1490:1970 | IS617:1959 |
| LM0 | A0 |
| LM1 | A1 |
| LM2 | A2 |
| LM3 | A3 |
| LM4 | A4 |
| LM5 | A5 |
| LM6 | A6 |
| LM7 | A7 |
| LM8 | A8 |
| LM9 | A9 |
| LM10 | A10 |
| LM11 | A11 |
| LM12 | A12 |
| LM13 | A13 |
| LM14 | A14 |
| LM15 | A15 |
| LM16 | A16 |
| LM18 | A18 |
| LM20 | - |
| LM21 | - |
| LM22 | A22 |
| LM23 | - |
| LM24 | A24 |
| LM25 | A25 |
| LM26 | A26 |
| LM27 | A27 |
| LM28 | A28 |
| LM29 | A29 |
| LM30 | A30 |
| ALSI-62 | - |
| ALSI-132 | - |
| Alsi9Cu3Fe | - |
| Alsi10MgFe | - |
| Alsi12Cu1Fe-Mn0.55 | - |
| Alsi12Cu1Fe-Mn0.05 | - |
| ADC1 | - |
| ADC3 | - |
| ADC6 | - |
| ADC12 | - |
| AC4B | - |
| AC2B | - |
| AC2A | - |